86-0-13642667366
A202, Jinfeng Building, Gaoqiao Business Street, Wanggang, Jiahe Street, Baiyun Dist., Guangzhou, Guangdong, China (Mainland)
Huawei 2POTS+4GE GEPON/GPON/EPON ONU HG8240
Huawei 2POTS+4GE GEPON/GPON/EPON ONU HG8240
The EchoLife HG8240 is an indoor optical network terminal (ONT) in Huawei FTTH solution. By using the GPON technology, ultra-broadband access is provided for home and SOHO users. The HG8240 provides two POTS ports, and four GE/FE auto-adapting Ethernet ports. TheHG8240 features high-performance service forwarding capabilities to ensure excellent experience with VoIP, Internet and HD video services. Therefore, theHG8240 provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment.
Port: 2POTS+4GE.
Plug-and-play (PnP): Internet, IPTV and VoIP services can be deployed by one click on the NMS and on-site configuration is not required.
Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports and call emulation initiated by the NMS.
High speed forwarding: GE line rate forwarding.
| GPON features | 1.Class B+ optical module |
| 2.Security authentication mode:SN, password or SN+password | |
| 3.Upstream/downstream FEC | |
| 4.GEM port mapping mode: VLAN,802.1p, VLAN+ 802.1p, IPToS,physical port,physical Port +VLAN,physical Port+802.1p,physical Port +VLAN +802.1p | |
Voice features | 1.SIP and H.248 protocols |
| 2.Media stream and signaling stream separation | |
| 3.Virtual Acess Gateway | |
| Maintenance features | 1.Local management using Web and remote management OMCI |
| 2.Opitcal power monitoring | |
| 3.802.ag Ethernet OAM | |
| 4.Loop–line test of POTS ports, call emulation and PPPoE dialup emulation | |
| Reliability features | 1.Dual systems for software protection |
| 2.Type B protection and rogue ONT detection | |
| 3.Lithium battery backup and backup battery monitoring | |
| Green engery-saving features | 1.Dynamic power consumption adjustment |
| 2.With a backup battery, the guaranteed services can be selected flexibly | |
| Ethernet features | 1.VLAN filtering and VLAN transparent transmission |
| 2.VLAN N:1 aggregation and VLAN 1:1 transtation | |
| Multicast features | IGMP V2&V3 snooping/IGMP proxy |
Ports on the rear panel of the HG8040
Descriptions of the ports on the rear panel of the HG8040
Port and Button | Function |
|---|---|
OPTICAL | Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream transmission. The type of the optical connector connected to the OPTICAL port is SC/APC. |
LAN1-LAN4 | Indicate auto-sensing 10/100/1000M Base-T Ethernet ports (RJ-45), used for connecting to PCs or IP STBs. |
ON/OFF | Indicates the power-on/power-off button, used for powering on or powering off the device. |
POWER | Indicates the power port, used for connecting to the power adapter or backup battery. |
Ports on the side panel of the HG8040
Descriptions of the ports on the side panel of the HG8040
Port and Button | Function |
|---|---|
RESET | Indicates the reset button. Press the button for a short time to reset the device; press the button for a long time (longer than 10s) to restore the device to the default settings and reset the device. |
LEDs on the HG8040
Indications of the LEDs on the HG8040
Silk Screen | Name | Status | Indication |
POWER | Power supply LED | Green: always on | The device is powered on. |
|
| Orange: always on | The device is powered by the backup battery. |
|
| Off | The power supply is cut off. |
PON | Authentication LED | See Table 4. | |
LOS | Connection LED | See Table 4. | |
LAN1-LAN4 | Ethernet port LED | Always on | The Ethernet connection is in the normal state. |
|
| Blinks | Data is being transmitted on the Ethernet port. |
|
| Off | The Ethernet connection is not set up. |
